Tetrahydrofuran manufacturers and suppliers

Tetrahydrofuran suppliers

Properties

Melting point:: -108°C

Boiling point:: 66 °C

Density: 0.887 g/mL at 20 °C

vapor density: 2.5 (vs air)

vapor pressure: <0.01 mm Hg ( 25 °C)

refractive index: n20/D 1.465

Flash point:: >230 °F

storage temp.: Store at +5°C to +30°C.

solubility: water: soluble

form: Liquid

Specific Gravity: 0.89

color: <10(APHA)

Relative polarity: 0.207

PH: 7-8 (200g/l, H2O, 20℃)

PH Range: 7

Odor: Ethereal, detectable at 2 to 50 ppm

explosive limit: 1.5-12.4%(V)

Water Solubility: miscible

FreezingPoint: -108℃

Sensitive: Air Sensitive & Hygroscopic

λmax: λ: 245 nm Amax: ≤0.26
λ: 275 nm Amax: ≤0.046
λ: 315 μm Amax: ≤0.0044

Merck: 14,9211

BRN: 102391

Henry's Law Constant: 1.54 (static headspace-GC, Welke et al., 1998)

Exposure limits: TLV-TWA 200 ppm (590 mg/m³) (ACGIH, MSHA, and OSHA); STEL 250 ppm (ACGIH); IDLH 20,000 ppm (NIOSH).

Stability:: Stable. Incompatible with halogens, strong oxidizing agents, strong reducing agents, strong bases, oxygen. May generate explosive peroxides in storage if in contact with air. Highly flammable. Store at room temperature under nitrogen. Hazardous polymerisation may occur. Light sensitive. May contain 2,6-di-tertbutyl-4-methylphenol (BHT) as a s

InChIKey: WYURNTSHIVDZCO-UHFFFAOYSA-N

LogP: 0.45 at 25℃

Safety Information

Symbol(GHS): GHS02,GHS07,GHS08

Signal word: Danger

Hazard statements: H225-H302-H319-H335-H336-H351

Precautionary statements: P201-P202-P210-P301+P312-P305+P351+P338-P308+P313

Hazard Codes: Xi,F,Xn

Risk Statements: 36/37/38-36/37-19-11-40

Safety Statements: 26-36-33-29-16-46-37-13

RIDADR: UN 2924 3/PG 2

WGK Germany: 1

RTECS: MD0916000

F: 3-10-23

Autoignition Temperature: 610 °F

TSCA: Yes

HazardClass: 3

PackingGroup: II

HS Code: 29321100

Toxicity: LD50 oral (rat) 2880 mg/kg
LC50 inhal (rat) 21,000 ppm (3 h)
PEL (OSHA) 200 ppm (590 mg/m3)
TLV-TWA (ACGIH) 200 ppm (590 mg/m3)
STEL (ACGIH) 250 ppm (737 mg/m3)

IDLA: 2,000 ppm [10% LEL]

Use

Tetrahydrofuran (THF) is an organic, polar, water-miscible, cyclic ether and aprotic solvent with low viscosity. It is a chemical intermediate used in the manufacture of polymers as well as agricultural, pharmaceutical, and commodity chemicals.BASF and Dairen Chemical together accounted for approximately half of the share of the THF market in 2016. BASF is the leader in the THF market.

You can find Tetrahydrofuran suppliers, manufacturers, and distributors from countries such as CHINA, India and the United States here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.